๐Ÿ“ฐ Why Your PR Draft Isn't Showing Coverage

Camilo Aponte

Camilo Aponte

Last updated on Nov 17, 2026

๐Ÿ“Œ Overview

If you open the press coverage view and see nothing, the cause is usually one of two things. Either the PR draft was never published, or the platform doesn't know which client or project you are viewing. This article explains both causes and how to fix them.

You may see a status such as Draft or Generated, with a note like "Content ready ยท no channels chosen". Both mean the press release has been created but has not been sent out. Coverage and the report only become available after the release is published and distributed to at least one channel. **

๐Ÿ”Ž Why You Don't See Any Press Coverage

These are the most common reasons:

  • The PR is still a draft. A draft is saved but not sent. No distribution means no coverage to report.
  • No distribution channel is selected. Publishing needs at least one channel chosen. Until you choose one, the release stays pending.
  • A project filter is applied. The press release list can be filtered by AI project or GBP project. If a project is selected that has no releases, the list looks empty even though your release exists under another project. **
  • The wrong client is selected. The release may be under a different client than the one you are viewing.
  • Coverage hasn't appeared yet. Even after publishing, pickups can take time to show up.

โœ… Step 1: Select the Correct Client

Start here, especially if the page looks completely empty.

  1. Open Authority Building > PR Distribution in the platform. **
  2. Look at the project filters on the press release list ("All AI projects" and "All GBP projects") and make sure they are set to "All" or to the project the release belongs to. **
  3. Choose the client the press release was written for.
  4. Wait for the page to reload and check whether your releases and coverage now appear.

If you manage several projects, check each one, or reset the filters to "All". A release belongs to the project it was created for, so it won't appear when a different project is selected. **

๐Ÿ“ Step 2: Check the Status of Your PR Draft

  1. Go to your list of press releases.
  2. Find the release you expect coverage for.
  3. Look at its status.
  • Draft: the release has not been published. Continue to Step 3.
  • Generated: the content is ready but no distribution channel has been chosen yet. Click Resume and continue to Step 3. **
  • Live: the release has been sent, so skip to Step 4. If the status is Publishing, some channels are still going live, so check again later. Use "Track" to see progress. **

๐Ÿ“ก Step 3: Choose a Distribution Channel and Publish

  1. Open the draft release.
  2. Go to the distribution or publishing step.
  3. Select at least one distribution channel from the available options.
  4. Review your content, headline, and details.
  5. Confirm and publish or submit the release.
  6. Return to your release list and confirm the status has changed from Draft or Pending.

Tip: If you can't select a channel, check that a client is selected and that all required fields in the draft are complete. Missing information can stop the process from moving forward.

๐Ÿ“Š Step 4: View Your Press Coverage

  1. Make sure the correct client is selected.
  2. Open the published release.
  3. Look for the coverage, pickups, or reporting section.
  4. Review the listed placements and links.

Coverage is not always instant. Some placements appear within hours and others take longer. If your release was published very recently, check back later before assuming something is wrong.

๐Ÿ› ๏ธ Quick Troubleshooting Checklist

  • Is the correct client or project selected?
  • Does the release show as published rather than Draft or Pending?
  • Did you select at least one distribution channel?
  • Have you allowed enough time since publishing?
  • Have you refreshed the page or signed out and back in?

If you have gone through every item and the page is still empty, the issue may need a closer look from our team.

๐Ÿ’ก Best Practices to Avoid This Issue

  • Select the client first, before creating or viewing any press release.
  • Choose your distribution channels while you write the draft, not afterward.
  • Check the status of each release after you submit it.
  • Keep releases for different clients organized, and double-check the active client before you publish.

๐Ÿ’ฌ Need More Help?

If you need further assistance, open the chat widget in the bottom-right corner of the platform and send your message. A member of our support team will reply in the chat.

To help us resolve your case faster, include the client name, the title of the press release, and the status you see (for example, Draft or distribution pending).

Was this article helpful?