πŸ”— Linking a Shopify Store to an OTTO Project

Camilo Aponte

Camilo Aponte

Last updated on Nov 18, 2026

If your Shopify app is connected to a store address ending in .myshopify.com but your OTTO project uses your public website domain, OTTO may not recognize the platform. This article explains why that happens, how to check your setup, and what to send our support team if you still need help.

❓ What You May See

  • OTTO shows a "platform not identified" message for your project.
  • The CMS connector lists only Contentful and does not offer Shopify.
  • Your Shopify app shows as connected, but OTTO does not appear to use it.

🧠 Why This Happens

Every Shopify store has two addresses. One is the internal address (for example, yourstore.myshopify.com). The other is the public domain your customers visit (for example, yourwebsite.com). OTTO projects are built around the public domain, and OTTO identifies the platform by looking at that domain.

The connection can fail to match for a few common reasons:

  • The project domain is not the primary domain of the connected Shopify store.
  • The domain points to a different site, or redirects to another address, so OTTO cannot see a Shopify storefront.
  • The storefront is password protected, or traffic goes through a proxy or custom front end that hides the Shopify signals.
  • The project domain differs slightly from the store domain, such as www versus non-www, or http versus https.
  • The Shopify connection belongs to a different store than the website in your project.

When OTTO cannot identify the platform, nothing in the connector list is highlighted as "detected". The list itself depends on which connectors are available for OTTO, so you might see only Contentful. Shopify is not guaranteed to appear as an automatic connector there, because it is linked through the Shopify connection flow.

βœ… Step 1: Confirm the Store and Domain Match

  1. In your Shopify admin, open Settings and then Domains.
  2. Check that your public domain is listed and set as the primary domain.
  3. Confirm that the .myshopify.com address shown there is the same store you connected in the Search Atlas Shopify app.
  4. Open your public domain in a private browser window and check that it loads your Shopify storefront without a password page or redirect to another site.

If your public domain is not attached to the connected store, OTTO cannot treat the two as the same website. In that case the domain needs to be added to that Shopify store, or the connection needs to be made with the store that actually owns the domain.

πŸ”Ž Step 2: Check the OTTO Project Domain

  1. Open your project in Search Atlas and review the domain it targets.
  2. Make sure the project's domain is the same host as one of your Shopify domains, normally your primary domain. A www versus non-www difference is treated as the same site, but a different domain or subdomain (for example shop.yourwebsite.com versus yourwebsite.com) is not.
  3. If it does not match, update the project or create a new project using the correct domain.

πŸ”„ Step 3: Reconnect and Re-Check

  1. Open the Search Atlas app inside Shopify and confirm it is still installed and authorized for the correct store.
  2. If anything looks wrong, disconnect and reconnect the app, accepting all requested permissions.
  3. Return to your OTTO project and refresh the page.
  4. Open the project's platform or CMS settings and check whether Shopify is now detected.

Detection can take a little time after changes. If you updated your domain settings in Shopify, wait a few minutes and try again.

🌐 When the Store and Project Are Truly on Different Domains

Sometimes the store you connected is not the same website as your OTTO project. For example, the Shopify store may be tied to one brand while the project targets a different site. A connection is tied to the store that owns the domain, so OTTO cannot reuse it for an unrelated website.

  • If both domains belong to the same store, make sure the project domain is attached to that store in Shopify (Step 1).
  • If they are different sites, the project needs its own platform connection. If the website is not on Shopify, choose the connector that matches the platform it actually runs on.
  • Only connect stores you own or have permission to manage.

πŸ“ Why the Connector Shows Only Contentful

The connector list depends on what OTTO can detect for the project domain. If the platform is not identified, you may see only a limited set of options. Contentful is a separate content platform and is not a substitute for a Shopify connection, so do not connect it unless your site really uses Contentful. Once the domain and store match and OTTO detects Shopify, the Shopify option should become available.

πŸ’¬ What to Send Support If It Still Does Not Work

Linking an existing store connection to a project, or confirming that setup is complete, may need a check from our team. To help us resolve it quickly, include the following in one message:

  • The OTTO project domain (for example, yourwebsite.com).
  • The .myshopify.com address of the connected store.
  • Whether your public domain is set as the primary domain in Shopify.
  • The exact message you see, such as "platform not identified," and where it appears.
  • A screenshot of the connector screen and of your Shopify Domains page.

If you need further assistance, open the chat widget in the bottom-right corner of the platform and send your message. A member of our support team will reply in the chat.

πŸ’‘ Quick Tips to Avoid This Issue

  • Create OTTO projects using the same public domain that is primary in Shopify.
  • Install the Search Atlas Shopify app on the store that owns that domain.
  • Remove storefront passwords before running platform detection.
  • Avoid redirects from your project domain to a different domain.
  • Recheck your connection after changing domains or themes in Shopify.

Was this article helpful?