⚙️ Fix OTTO Wrong UUID Status

Camilo Aponte

Camilo Aponte

Last updated on Nov 4, 2026

🔍 What this status means

OTTO shows Wrong UUID when the installation it found is configured with a UUID that does not match this project. The status is saved from the installation check, and a later check that finds the correct UUID replaces it.

✅ Confirm the UUID before you change anything

Click Scan to open Installation Diagnostics, then click Run Diagnostics. For a signed-in project check this runs the full installation check, which saves the status. If the script UUID matches this project, the status changes away from Wrong UUID. If it stays on Wrong UUID, the script OTTO found is still using a different UUID, so reinstall it from the installation guide rather than treating the message as a stuck status.

🛠️ Clear the script and site cache

This is the sequence that support used with the customer before diagnosing a stale status:

  1. Remove the installation script from the site.
  2. Purge the site cache.
  3. Wait so the old cached copy can clear.
  4. Add the same installation script back. Do not change the UUID if the scan already verified it.
  5. Run the scan again and check whether the OTTO window still says WRONG UUID.

📊 If the status is still stuck

Wrong UUID means the last installation check found a script UUID that does not match this project. Setting Crawl Frequency to Never only stops scheduled site recrawls; it does not freeze the UUID status. Recrawling the site or running a manual reprocess refreshes crawl data and suggestions, but the UUID status changes only when you run the installation check again and the script UUID matches.

After you remove the script, purge the cache, wait, and re-add the script from the installation guide, click Scan and run the installation check again. When the script UUID matches this project, Wrong UUID is replaced. Crawl Frequency, including Never, only controls how often the site is recrawled and does not affect this status.

💬 Contact support

If you need further assistance, open the chat widget in the bottom-right corner of the platform and send your message. A member of our support team will reply in the chat.

Was this article helpful?