🏷️ Fix White-Label Domain Invite Issues

Camilo Aponte

Camilo Aponte

Last updated on Nov 3, 2026

🏷️ What the invite message means

A completed domain setup and an accepted white-label invitation are two separate steps. DNS and SSL can look finished while the platform still treats the workspace as waiting for an invitation. Until that invitation is accepted under the correct account, branding, color metrics, and shared report links can keep using the default Search Atlas experience.

The message does not always mean your DNS failed. It usually means the invite was sent to a different email, expired, was opened while signed into another account, or was never accepted after the domain became active.

βœ… Confirm the domain is fully connected

Open your white-label or agency branding settings and check the custom domain status before changing anything else.

  • The domain should show as connected or active, not pending, failed, or unverified.
  • Both the root domain and the www version should point to the records shown in the platform. Mixing old and new records can leave the domain half connected.
  • SSL should show as active. A certificate that is still provisioning can make share links fail on mobile even when the domain looks complete.
  • Remove duplicate domains if the same hostname is attached to more than one workspace.
  • After DNS changes, allow time for propagation, then refresh the status inside the platform rather than only checking your registrar.

If the status is anything other than active, finish or retry that connection first. An invitation cannot apply branding to a domain that is not fully live.

βœ‰οΈ Accept the invitation on the right account

The invite must be accepted by the same user who should own or access the white-label workspace.

  1. Sign out of every Search Atlas session, including other browser profiles.
  2. Open the invitation email and confirm it was sent to the address you use for this workspace. Check spam and promotions folders if you cannot find it.
  3. Sign in with that exact email, then open the invite link again. Accepting it while signed in as someone else leaves the original account waiting for an invitation.
  4. If the link expired or was already used, resend the invitation from the white-label or team settings and use only the newest link.
  5. After accepting, return to the domain settings and refresh. The invitation prompt should clear once the account and domain are linked.

Agency owners should also confirm the customer or team member was invited to the correct project. An invite to a different project will not remove the prompt on this domain.

🎨 Fix branding and color metrics

Color metrics and branded interface elements load from the white-label profile tied to the active domain. If the invite is still pending, those settings are ignored and reports fall back to default colors.

  • After the invite is accepted, open branding settings and re-save your logo, brand name, and primary and accent colors.
  • Use full hex color values and save once. Partial saves can leave charts on the default palette.
  • Hard-refresh the report or open it in a private window so cached colors are not reused.
  • Check both desktop and mobile. A saved palette applies only after the custom domain serves the report, not when it is opened on a default Search Atlas URL.

πŸ“± Repair mobile and report share links

Share links must use the connected white-label domain. An older link that still points to a Search Atlas hostname, or a link created before SSL finished, will look broken or unbranded on mobile.

  1. Confirm the domain status is active and the invitation prompt is gone.
  2. Open the report from the project and create a new share link. Do not reuse a link copied before setup finished.
  3. Check that the new link starts with your custom domain and loads over https.
  4. Send that new link to a phone and open it in a private browser tab. Disable VPN or private DNS temporarily if the phone cannot resolve the domain.
  5. If only some reports fail, regenerate the link for each affected report. Links are not all updated automatically when branding changes.

If a new link works on desktop but fails on mobile, the phone is usually caching DNS or opening an old bookmark. Clear the mobile browser cache or try another network, then retest the new link.

πŸ› οΈ If the prompt remains

Recheck three items together: domain status is active, the newest invite was accepted by the signed-in email, and a newly generated https link uses your domain. Saving branding again after those are true resolves most color and share-link issues.

If you need further assistance, open the chat widget in the bottom-right corner of the platform and send your message. A member of our support team will reply in the chat.

Was this article helpful?