## **🔗 What this covers**

Wildfire places links between sites. If you want those links off your site and your links off other sites, turn off the Wildfire option in each project. You do this yourself in project settings. Repeat the same step for every client or site.

## **⚙️ Turn off Wildfire in a project**

1. Open the project for the site you want to update.
2. Open the project’s Settings dialog. It opens on Automation, where the WILDFIRE link exchange block is shown.
3. In the WILDFIRE link exchange section, find the switch labeled Wildfire.
4. Turn the Wildfire switch off, click Save settings, and confirm Leave and remove links.
5. Confirm the Wildfire switch is off and its text says Not enrolled for that project.

After the option is off for a project, Wildfire should no longer run for that site. That stops Wildfire links on the site and stops that site’s links from being placed on other sites through Wildfire.

## **📊 Apply this to other clients and sites**

Wildfire is controlled per project. Turning it off in one project does not change your other clients or sites.

- Open each remaining project one at a time.
- In that project, open the same Settings dialog. It opens on Automation.
- Turn the Wildfire switch off there as well, click Save settings, and confirm Leave and remove links.
- Check every project you manage so none are left on.

## **💡 If the option is already off**

If support or engineering already disabled Wildfire for a site, you should see the Wildfire option turned off in that project’s settings. You do not need a separate request for other clients. Use the same Wildfire option in each project’s settings.

## **🛠️ Still need help**

If you need further assistance, open the chat widget in the bottom-right corner of the platform and send your message. A member of our support team will reply in the chat.