## **🔗 What this issue looks like**

Brand Vaults hold brand-specific information and content settings. If internal links appear missing in content associated with several vaults, check each article’s saved content and available link sources. Record the affected articles and vaults, but do not assume a shared platform defect without investigation. Source: `content-assistant/app/cgenius/v5/services/link\_pool.py:3–18`; `content-assistant/app/cgenius/v5/domain/markdown\_ops.py:928–932`.

## **📋 Confirm it is the same issue**

Before you retry edits, confirm the pattern so support can match it to the existing escalation.

- Open at least two brand vaults where the problem was reported.
- Try inserting one internal link on a page you can edit in each vault.
- After the edit has saved, refresh the page and confirm that the link remains in the article content and points to the expected URL. The Structure panel’s internal-link count can provide an additional check, but inspect the article itself to verify the destination. Source: `customer-frontend/src/modules/content-assistant/v3/components/insight/tabs/StructureTab.tsx:55–71`.
- Note whether the failure is the same in every vault: the link never appears, it appears then disappears, or only some target pages fail.
- For an internal link, choose a relevant destination on the website the article is intended for. Review the vault’s curated internal-link URLs for mistakes; saving a URL there does not guarantee that the platform has verified its brand or domain relationship. Source: `content-assistant/app/cgenius/v5/services/link\_pool.py:174–176,427–433`.

If only one vault fails, review that vault’s pages and targets first. If several vaults fail in the same way, treat it as a cross-vault insertion issue and avoid bulk retries.

## **🛠️ Steps to try in each affected vault**

1. Reload the platform and open the vault again so you are not working from a stale page.
2. Insert one internal link only. Use a target page that is published or otherwise eligible for internal linking in that vault.
3. Save the content, then refresh and confirm the link is still there.
4. Repeat the same single-link test in a second vault. Do not paste large batches of links while the issue is active.
5. If an insertion appeared successful but the link is missing, refresh and inspect the saved article before retrying once. Automatic insertion skips destinations already linked in the article. If the link still does not appear, report the affected article and target URL rather than repeatedly retrying. Source: `content-assistant/app/cgenius/v5/domain/markdown\_ops.py:937–965`.

**Do not** delete large sets of existing internal links as a reset. That can remove valid links and make recovery harder.

## **⚠️ What not to change while this is open**

- Do not rebuild internal links across every brand vault at once.
- Do not change site URLs, canonical settings, or content slugs only to force a link to save.
- Do not assume a failed insert means the target page is blocked. A cross-vault pattern is more consistent with an insertion defect than with one page setting.

## **💬 What to send if it is still failing**

If the single-link test still fails in more than one vault, contact support with the details below. This helps the team tie your report to the open escalation instead of starting a new one.

- Each affected brand vault name.
- The page you edited and the target URL you tried to insert.
- Whether the link never appeared or disappeared after refresh.
- The approximate date and time of the last test.
- A short note that the same behavior happens across several brand vaults.

Support may already be tracking this behavior from an earlier escalation. Sharing the vault names and a fresh test result lets the team confirm whether your account is included and whether a fix has reached your workspaces.

If you need further assistance, open the chat widget in the bottom-right corner of the platform and send your message. A member of our support team will reply in the chat.