## **⏱️ How long the first post takes**

After you enable Automated posts and choose Start posting today, the first post is not created instantly. A background job checks for due locations twice a day, at 12:05 AM and 12:05 PM, so it can take up to about 12 hours. The post appears in the list only after that job creates it.

You do not need to create the first post manually or click a separate generate button. Saving with Automated posts set to Enabled and Start posting today makes the location eligible for the next twice-daily run. Later posts follow the frequency you configured.

## **✅ What must be in place**

Confirm these items before you wait for the first post:

- The correct Google Business Profile location is connected to the project.
- Automated posting is enabled, not only drafted.
- **Start Posting Today** is selected and the settings are saved.
- Optional settings such as services, AI writing tips, image source, and review publishing can shape the content, but they are not required for the first post to be generated.
- Open the posts list for the same location you configured. A post that needs approval appears under the Awaiting Approval filter. If auto-publish is selected and the post has an image, it can appear under Scheduled, Pending, or Posted instead.

If the Google Business Profile location is not connected, Automated posts is not Enabled, or the start date is still in the future, generation waits until that setup is complete.

## **🔍 If nothing appears under Awaiting Approval**

Refresh the posts list after the next 12:05 AM or 12:05 PM run. If it is still empty, work through this checklist.

1. Open the automation settings and confirm they saved with **Start Posting Today** still selected.
2. Confirm the Google Business Profile connection is active for that location.
3. Check that you are on the correct project and location.
4. Look in other post statuses in case the post was already approved or published.
5. Do not toggle Automated posts off and on to force a post. Generation runs only at the next scheduled check, and a location that already ran successfully is not generated again until its next frequency date.
6. Refresh the posts list after the next 12:05 AM or 12:05 PM run, then check Awaiting Approval and the other status filters.

A blank posts list right after saving is normal. Follow up only if the post is still missing after the next 12:05 AM or 12:05 PM run and the checks above.

## **💬 When to contact support**

Contact support if the location is connected, Automated posts is saved as Enabled with Start posting today, and no post appears in any status after the next 12:05 AM or 12:05 PM run and a refresh. Include the project name, location name, and the time you enabled automation.

If you need further assistance, open the chat widget in the bottom-right corner of the platform and send your message. A member of our support team will reply in the chat.