## **📌 What this article covers**

If you manage a large site list, it can be hard to see which sites are active and which ones are still receiving new articles. This guide explains how to find active sites, what Inactive means, and how article assignment works.

## **✅ What Active and Inactive mean**

**Active** means the site is eligible for ongoing work in the platform, including new article assignment when your plan and settings allow it.

**Inactive** means the site is saved in your account but is not currently receiving new articles. Inactive is common when you have added many sites and only a subset is turned on for content.

- Inactive does not delete the site or its history.
- Inactive sites do not get new articles until they are made active and assigned.
- A long gap with no new articles usually means the sites you are watching are inactive, unassigned, or outside your current content allowance.

## **🔎 How to find your active sites**

1. Open the publisher portal, then **Publications** → **Existing Publication** for sites and **Articles** → **Awaiting Publication** for article assignments.
2. Use the status filter and choose **Active**. Leave search blank so every active site is included.
3. Review the status column. Only rows marked Active are currently eligible.
4. Sort or scan the list if you have thousands of sites. Filtering is faster than scrolling.
5. Open an active site to confirm its content or article settings are turned on.

To review sites that are not receiving articles, switch the same filter to **Inactive**.

## **📝 How article assignment works**

New articles are assigned only to sites that are active and included in your content setup. Adding a site does not by itself start article delivery.

- The site status must be Active.
- The site must be included in the article or content assignment for your account.
- Delivery follows your plan limits. When the allowance is used, new articles wait until the next cycle or until you change which sites are included.
- Sites left Inactive are skipped so your allowance is not spread across every site you have ever added.

## **🛠️ If you have not received articles for a long time**

1. Filter the site list to Active and note how many sites appear.
2. If the active list is empty, select the sites that should receive content and set them to Active.
3. Confirm those sites are included in article assignment, not only added to the account.
4. Check that you still have article allowance for the current period.
5. Give the platform time to generate the next batch after a site is activated. Older inactive sites will not show a recent article history.

If most of thousands of sites show Inactive, that is expected unless you have explicitly activated them. Activate only the sites that should receive articles so delivery stays focused.

## **💬 Still need help**

If the active filter does not match what you expect, or articles still do not appear after you confirm status and assignment, contact support from inside the platform. If you need further assistance, open the chat widget in the bottom-right corner of the platform and send your message. A member of our support team will reply in the chat.