## **📌 What this article covers**

Use this guide when OTTO appears live on your site but the Search Atlas install checker does not show it, and when you need to keep paths such as **/listing/** out of both the crawl and OTTO. It also explains how to stop the current crawl and start a fresh one after exclusions are saved.

## **🔍 Why the checker and the live site can differ**

A live OTTO script does not always mean the install checker has recorded an engaged status yet. The checker looks at the pages it can reach, the project domain, and the latest crawl results. A mismatch is common when:

- The script is present on some templates but missing on the homepage or other pages the checker samples.
- A tag manager, consent banner, or cache is delaying the script.
- The crawl is still running on an older URL list that includes pages you now want excluded.
- The connected domain does not exactly match the live host, including www and https.

Confirm the script on the public homepage and on one inner page, then refresh the install checker after the new crawl finishes.

## **📍 Where to Find It**

**UI path:** Left sidebar → OTTO SEO → Site Audit → Crawl Monitoring

## **⚙️ Confirm OTTO engage status**

1. Open the correct site project in Search Atlas and confirm the domain matches the live site.
2. Go to the OTTO or installation area and review **Engage** status.
3. If status is not engaged, re-save the installation and publish the script on the site template that loads on every public page you want OTTO to manage.
4. Clear the site cache or CDN, then load the homepage in a private browser window and confirm the Search Atlas script is present.
5. Return to Search Atlas and run the install checker again. Allow a few minutes if the site cache was just cleared.

Excluding a path removes those URLs from OTTO and from future crawls. It does not place the script on pages that do not already contain it.

## **🚫 Exclude all listing pages**

To exclude every URL under **/listing/**, add a path rule before you restart the crawl:

1. Open the site project and go to crawl settings, URL exclusions, or the OTTO page-scope settings.
2. Add an exclusion for the path pattern **/listing/**. Use a contains or starts-with rule if the product offers match types, so both **/listing/** and deeper URLs such as **/listing/example/** are covered.
3. Apply the same exclusion to OTTO so those pages are not selected for OTTO changes.
4. Save the rule and confirm it appears in the active exclusion list. Add both www and non-www variants only if your project treats them as separate hosts.
5. Do not exclude the homepage, key service pages, or other URLs you still want crawled and optimized.

If listing URLs use a different folder, such as **/listings/**, add that exact path as its own rule. Rules are not applied to a crawl that is already in progress.

## **🔄 Stop the current crawl and start again**

Yes. You can stop the current crawl and restart it after exclusions are saved.

1. Open the crawl or site audit progress view for the project.
2. Select **Stop** or **Cancel crawl** if a crawl is running. Wait until the status changes from running to stopped or canceled.
3. Confirm the **/listing/** exclusion is saved.
4. Select **Start crawl** or **Recrawl**. This starts a new crawl using the updated exclusion list.
5. When the crawl completes, open the URL list and verify that listing pages were skipped, then rerun the install checker.

Stopping a crawl discards that in-progress pass. It does not remove OTTO from your website. Previously crawled listing URLs may remain visible in older results until the new crawl replaces them.

## **✅ After the new crawl**

- Engage status should reflect pages that still contain the OTTO script and were included in the crawl.
- Listing URLs should be absent from the new crawl and excluded from OTTO actions.
- If the checker still fails, compare the sampled page with the live homepage and confirm the script is not blocked by consent mode, a cache rule, or a template that loads only on certain sections.

If you need further assistance, open the chat widget in the bottom-right corner of the platform and send your message. A member of our support team will reply in the chat.