## **🔍 Overview**

When you deploy a Cloud Stack, Search Atlas pushes your content to multiple providers simultaneously. Most providers go live within minutes, but **Cloudflare** has a longer propagation window due to its global network architecture. Seeing **Awaiting** next to Cloudflare while all other providers show **Live** is completely normal and does not indicate a failure.

This article explains each deployment status, why Cloudflare takes longer, and what steps to take if the delay exceeds the expected window.

## **📋 Understanding Deployment Statuses**

Each provider in your Cloud Stack will display one of the following statuses:

- **Live** — The provider has successfully published your content and it is publicly accessible.
- **Awaiting** — The deployment request has been sent and is in queue or propagating. This is a **normal, expected state** — not an error.
- **Failed** — The provider encountered an error during deployment. This status requires action and is visually distinct from Awaiting.

**Important:***Awaiting* and *Failed* are two different statuses. If your Cloudflare provider shows **Awaiting**, your deployment is progressing normally. Do not attempt to rebuild or re-trigger the deployment while this status is active.

## **⏱️ Why Cloudflare Shows 'Awaiting' Longer Than Other Providers**

Cloudflare operates one of the largest content delivery networks in the world. When Search Atlas pushes a deployment to Cloudflare, the following happens:

1. The deployment request enters Cloudflare's provisioning queue.
2. Cloudflare validates and distributes the content across its global edge nodes.
3. DNS propagation completes and the status updates to **Live**.

This process typically takes **15 to 45 minutes** but can occasionally extend to a few hours depending on Cloudflare's network conditions. All other providers in your Stack — such as the 13 providers already showing Live on your deployment — operate on faster individual pipelines, which is why they resolve first.

## **✅ What To Do While Cloudflare Shows 'Awaiting'**

Follow these steps to confirm everything is on track:

1. Verify that the status shown is **Awaiting** and not **Failed**. The labels are clearly differentiated in the interface.
2. Check the timestamp of your deployment. If it has been **less than 2 hours**, no action is needed — allow propagation to complete.
3. Refresh your Cloud Stack dashboard after 30 minutes to check for a status update.
4. If the status remains **Awaiting** after **4 hours**, proceed to the escalation steps below.

**Do not use any rebuild or re-deploy action while the status shows Awaiting.** Triggering a rebuild during active propagation can cause duplicate deployment conflicts and further delay the process.

## **📊 Track Keyword Rankings While You Wait**

While your Cloudflare provider finishes propagating, you can begin setting up rank tracking for your domain so you are ready to monitor performance as soon as the full Stack goes live.

1. In the left sidebar, navigate to **Keywords → Rank Tracker** (Keyword Rank Tracker).
2. Enter your domain (e.g., hugehealthfitness.com) and add the target keywords you want to monitor.
3. Set your preferred location and search engine settings.
4. Save your configuration — tracking will begin on the next scheduled crawl cycle.

Having your Rank Tracker configured in advance means you will capture baseline data immediately once all Cloud Stack providers, including Cloudflare, are fully live.

## **🚨 When 'Awaiting' Might Actually Be a Problem**

In rare cases, a status can become stuck. Look for these signs that something may require investigation:

- Cloudflare shows **Awaiting** for more than **6 hours** with no change.
- The deployment timestamp shows the job was initiated more than 24 hours ago.
- Other providers that were Live have reverted to a different status.

If any of these conditions apply, document your **Stack ID** (e.g., Stack ID 24055) and the exact duration before contacting support. Do not rebuild — our team will investigate the deployment job directly.

## **💬 Need Help?**

If you need further assistance, open the chat widget in the bottom-right corner of the platform and type **human teammate** to be connected with a member of our team.